The PAN-05 enables you to patch two microphones into one single
mixing desk channel in situations where you run out of channels.
Since decoupling occurs via a balanced resistor network, the PAN-05
also lets phantom power “pass through,” useful for condenser microphones.
However, due to the difference in sound and signal level, mixing
dynamic and condenser mics should be avoided. Best results will
be achieved using two identical mics.
| Technical Specifications |
|
* Input: 2 - XLR/balanced/ nominal impedance
200 ohm
* Output: 1 - XLR/balanced/load impedance >200 ohm
* Typical attenuation: 6 dBu
|
